- Home
-
- Fraises pour défonceuses
- Pour le travail du bois
- Fraises à rayon concave
- Fraises à bords droits pour canaux
- Fraises à mortaiser
- Fraises pour joints flexibles
- Fraises à chanfreiner
- Fraises à queue d'aronde
- Fraises à arêtes de coupe axiales
- Fraises à canal droit double
- Fraises hélicoïdales
- Coupe-bordure droite pour couper
- Coupe-disques
- Emporte-pièces demi-ronds
- Fraises à encoche en V
- Cutter à bords droits pour poser les joints de fenêtres et de portes
- Fraises à rainure en T
- Coupe-doigts / Coupe-main courante
- Fraises à rayon convexe
- Fraises pour joints à rainure et languette
- Coupe-étapes
- Coupeur pour portes
- Coupe-tours d'orge
- Fraises profilées
- cutters pour collage adhésif
- Fraises pour corian / HIMACS
- Fraises pour plastiques
- Fraises pour métal
- Fraises pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
- Fraises pour fenêtres et portes
- Fraises diamantées polycristallines
- Composants
- Pinces et accessoires
- Pour le travail du bois
- Porte-outils
- Porte-outils à rainurer
- Têtes de coupe quart de rond
- Têtes de coupe à jointoyer
- Tête de coupe pour biseaux
- Tête de coupe à panneaux surélevée
- Têtes de coupe à remise
- Porte-outils pour cadres de fenêtres
- Porte-outils profil-contre-profil
- Porte-outils à rainure et languette
- Planification des têtes de coupe
- Autres têtes de coupe
- Composants
- Porte-outils pour machines Biesse
- Couteaux interchangeables
- Lames Circulaires
- Mèches pour perceuses
- Roulements
- Diamètre intérieur jusqu'à 10 mm
- Diamètre intérieur 1,5mm
- Diamètre intérieur 2 mm
- Diamètre intérieur 2,38mm - 3/32 inch
- Diamètre intérieur 2,5 mm
- Diamètre intérieur 3 mm
- Diamètre intérieur 3,17mm - 1/8 inch
- Diamètre intérieur 4mm
- Diamètre intérieur 4,75mm - 3/16 inch
- Diamètre intérieur 5mm
- Diamètre intérieur 6mm
- Diamètre intérieur 6,35mm - 1/4 inch
- Diamètre intérieur 7mm
- Diamètre intérieur 7,94mm - 5/16 inch
- Diamètre intérieur 8mm
- Diamètre intérieur 9mm
- Diamètre intérieur 9,52mm - 3/8 inch
- Diamètre intérieur de 10 à 20mm
- Diamètre intérieur 20 mm et plus
- Diamètre intérieur jusqu'à 10 mm
- Virutex
- Machines
- Accessoires
- Consommables
- Composants
- AB11C Pièces
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Pièces pour machines CE
- Pièces pour machines EB
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Pièces pour machines FR
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Pièces pour machines TM
- RZ170N Parts
- RZ70M Parts
- Other parts
- Autres produits
- Sale
- Fraises pour défonceuses
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Fraises pour défonceuses
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 25 produits.
Rounding over router bit R...
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
BT4 4,0x50
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
BTXL2 4,0x100
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
STR2 8,0x70 R2
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
EPROCUT Rounding over bit...
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
- -10%
- -10%
Rounding Over Cutter R 2...
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Ball nose Spiral cutter. D4...
all nose Spiral cutter Z1 Positive - Upcut for Plastics...
all nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
- -10%
- -10%
Sinking cutter for solid...
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
- -10%
- -10%
Rounding over bit R2 S8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Titman Staff / corner bead...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
- -10%
- -10%
Titman Staff / corner bead...
Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8
Titman Staff / corner bead bit with bearing R=4,8 S=8 CBC48-8
- -10%
- -10%
Miniature rounding over...
Titman rounding over cutter R=2 S=8
Titman rounding over cutter R=2 S=8
- -10%
- -10%
Diamond PCD rounding over...
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Knuckle bone cutter for...
Knuckle bone cutter for solid surface
Knuckle bone cutter for solid surface
- -10%
- -10%
T-Slot cutter with radius
T-Slot cutter with radius
T-Slot cutter with radius
- -10%
- -10%
T-Slot cutter with radius
T-Slot cutter with radius
T-Slot cutter with radius
- -10%
- -10%
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm