Fraises pour défonceuses

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

Two flute rounding over cutter with an exchangeable bearing...

Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8

all nose Spiral cutter Z1 Positive - Upcut for Plastics...

all nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Titman rounding over cutter R=2 S=8

Titman rounding over cutter R=2 S=8

Cove mould cutter for solid surface

Cove mould cutter for solid surface

Guttering cutter for solid surface

Guttering cutter for solid surface

Knuckle bone cutter for solid surface

Knuckle bone cutter for solid surface

T-Slot cutter with radius

T-Slot cutter with radius

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...

Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8

T-Slot cutter with radius

T-Slot cutter with radius

Profile cutter RBB

Profile cutter RBB