Along grain joint cutter...
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
- -15%
- -15%
Filtrer par
Disponibilité
Diamètre du trou
Diamètre (D)
Longueur de coupe - hauteur
Porte-outils
Il y a 15 produits.
Filtres actifs
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
Stark along grain joint cutter 125X50 Z=2 YH152AAM
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Porte-outils