Porte-outils

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...

LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN   CCEN350128

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.