Grooving cutter TYPE B -...
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
- -15%
- -15%
Filtrer par
Disponibilité
Diamètre du trou
Diamètre (D)
Longueur de coupe - hauteur
Porte-outils
Il y a 15 produits.
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Porte-outils