Porte-outils

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

grooving cutter TYPE B - 140X7,65 Z=2

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves  

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves  

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves  

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves  

grooving cutter TYPE B - 160x7,65 mm Z=2

grooving cutter TYPE B - 160x7,65 mm Z=2

grooving cutter TYPE B - 160x7,65 mm Z=2

grooving cutter TYPE B - 160x7,65 mm Z=2

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm.  can be combined with Type A milling head with the same diameter and bore.