Porte-outils

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

for high precision groove cutting, chip thickness limitation...

for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086