Home

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

Coupe-guide de roulement pour couper les placages saillants et...

Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Straight bit shank 12 mm

Straight bit shank 12 mm