BT4 2,5x40
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 20 produits.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 17730 T-slot cutter TC 9.5 mm with 8 mm shank
ENT 17730 T-slot cutter TC 9.5 mm with 8 mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction