Home

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Bearing guide cutter with three cutting edges for particularly...

Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile mould cutter

Profile mould cutter

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting