Home

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron...

Cornerround knife radius 2mm D.16 x 16,5 x 2 R=2 Biesse Akron 1 piece

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

Knife in HW 16.5x16x2 R=2 CCEN700007

Knife in HW 16.5x16x2 R=2 CCEN700007

Knife in HW R=2 N3402N0125

Knife in HW R=2 N3402N0125

Two flute rounding over cutter with an exchangeable bearing...

Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.

Knife in HW R=2 CSEN700020

Knife in HW R=2 CSEN700020

Knife in HW R=2 CSEN700019

Knife in HW R=2 CSEN700019

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700026

Knife in HW R=1/2/25 degrees CSEN700025

Knife in HW R=1/2/25 degrees CSEN700025

all nose Spiral cutter Z1 Positive - Upcut for Plastics...

all nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Rounding over cutter R6,3 S=6mm

Rounding over cutter R6,3 S=6mm

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

Edge scraper with anti-bleaching profile R=2 3402A0126

Edge scraper with anti-bleaching profile R=2 3402A0126

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Titman rounding over cutter R=2 S=8

Titman rounding over cutter R=2 S=8

Knuckle bone cutter for solid surface

Knuckle bone cutter for solid surface

T-Slot cutter with radius

T-Slot cutter with radius

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8