BT4 2,0x40
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
Filtrer par
Disponibilité
Diamètre du trou
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 73 produits.
Convient pour : acier, acier inoxydable, fonte, aluminium,...
Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Knife in HW R=1 N3402N0123
Knife in HW R=1 N3402N0123
Knife in HW 16.5x16x2 R=1 CCEN700013
Knife in HW 16.5x16x2 R=1 CCEN700013
Bevel cutter for folding and chamfering wood, laminate and...
Bevel cutter for folding and chamfering wood, laminate and plastic sheets.
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700026
Knife in HW R=1/2/25 degrees CSEN700025
Knife in HW R=1/2/25 degrees CSEN700025
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6...
ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6