Offerte

Filtri attivi

  • Lunghezza taglierina - altezza:19mm clear
Bearing guide trimmer D6.35 S12mm for solid surface | Titman Tools
  • -15%

Per materiali compositi

Bearing guide trimmer D6.35 S12mm for solid surface

Ref: XC066-63-12
Bearing guide trimmer Z2 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
50,93 € -15% 43,29 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
cSpiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

cSpiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
22,00 € -15% 18,70 €
4 in magazzino
ENT trimming cutter TC 19 x 19 x 62 mm | ENT
  • -20%

Frese per rifilare a taglienti assiali

ENT trimming cutter TC 19 x 19 x 62 mm

Ref: ENT-13585
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
33,00 € -20% 26,40 €
1 in magazzino
ENT trimming cutter TC 6 x 19 x 64 mm | ENT
  • -20%

Frese per rifilare a taglienti assiali

ENT trimming cutter TC 6 x 19 x 64 mm

Ref: ENT-13579
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
27,00 € -20% 21,60 €
8 in magazzino
Fresa per scanalature D8 S12 per materiali di superficie solida | Titman Tools
  • -15%

Per materiali compositi

Fresa per scanalature D8 S12 per materiali di superficie solida

Ref: XC001-8-12
Fresa per scanalature Z1 con diametro 8 mm e gambo 12 mm.
Adatto per Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari, tra gli altri
38,20 € -15% 32,47 €
1 in magazzino
Profile guide cutter D12,7 S6mm with bearing on shank | Titman Tools
  • -15%

Frese a taglienti diritti per rifilare

Profile guide cutter D12,7 S6mm with bearing on shank

Ref: PGC12719-6
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
55,00 € -15% 46,75 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Profile guide cutter D12,7 S8mm with bearing on shank | Titman Tools
  • -15%

Frese a taglienti diritti per rifilare

Profile guide cutter D12,7 S8mm with bearing on shank

Ref: PGC12719-8
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
55,00 € -15% 46,75 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Rounding over bit R12,7mm S12mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over bit R12,7mm S12mm

Ref: ROCB127-12
Ballbearings diameter 16 mm and 12,7 mm included.
79,00 € -15% 67,15 €
1 in magazzino
Rounding over cutter D35 R12,7 S8 mm with guide pin | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over cutter D35 R12,7 S8 mm with guide pin

Ref: ROC127-8
Rounding over cutter with guide pin shank 8 mm
83,00 € -15% 70,55 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Rounding over cutter R12 S12mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over cutter R12 S12mm

Ref: OC12-12
Rounding over cutter R12 S=12mm
79,94 € -15% 67,95 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Single flute cutter 10mm S12 for solid surface | Titman Tools
  • -15%

Per materiali compositi

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
43,00 € -15% 36,55 €
2 in magazzino
Single flute cutter 12,7mm S12 for solid surface | Titman Tools
  • -15%

Per materiali compositi

Single flute cutter 12,7mm S12 for solid surface

Ref: XC001-127-12
Single flute cutter Z=1 for solid surface
43,00 € -15% 36,55 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Single flute cutter Z2 Negative D10 L19 S12mm | Titman Tools
  • -15%

Per materiali compositi

Single flute cutter Z2 Negative D10 L19 S12mm

Ref: XC011-10-12
Single flute cutter Z2 Negative for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
42,00 € -15% 35,70 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
25,00 € -15% 21,25 €
1 in magazzino
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
27,00 € -15% 22,95 €
1 in magazzino
Straight Cutter TC Z1 D6 S8mm | ENT
  • -20%

Frese Punte per scanalature dritte

Straight Cutter TC Z1 D6 S8mm

Ref: ENT-10050
ENT Straight Cutter TC / One Flute with 8 mm shank
16,00 € -20% 12,80 €
1 in magazzino
Tongue & Groove Set TC ENT 17390 | ENT
  • -20%

Frese per incastri maschio/femmina

Tongue & Groove Set TC ENT 17390

Ref: ENT-17390
ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank
93,00 € -20% 74,40 €
1 in magazzino
Tongue and groove cutter for solid surface | Titman Tools
  • -15%

Per materiali compositi

Tongue and groove cutter for solid surface

Ref: XC511-12
In combinazione con la fresa XC506-12 è possibile realizzare un collegamento maschio-femmina.
Adatto, tra gli altri, per:

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
142,48 € -15% 121,11 €
1 in magazzino
Tongue and groove cutter for solid surface | Titman Tools
  • -15%

Per materiali compositi

Tongue and groove cutter for solid surface

Ref: XC506-12
In combinazione con la fresa XC511-12 è possibile realizzare un collegamento maschio-femmina.
Adatto, tra gli altri, per:

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
142,48 € -15% 121,11 €
1 in magazzino