Offerte

Filtri attivi

  • Lunghezza totale:38 mm clear
Rounding over bit R1 S6mm | Titman Tools
  • -20%

Frese a raggio concavo

Rounding over bit R1 S6mm

Ref: ROCB1-6
Ballbearings diameter 16 mm and 12,7 mm included.
2 in magazzino
105,00 € -20% 84,00 € 
Rounding over bit R1 S8mm | Titman Tools
  • -20%

Frese a raggio concavo

Rounding over bit R1 S8mm

Ref: ROCB1-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 in magazzino
105,00 € -20% 84,00 € 
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -20%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
18,00 € -20% 14,40 € 
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
20,00 € -20% 16,00 € 
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
20,00 € -20% 16,00 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -20%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
14,00 € -20% 11,20 €