Offerte

Filtri attivi

  • Lunghezza totale:57mm clear
Arbor for Groovers 6,35mm S8mm | Titman Tools
  • -15%

Frese a disco

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
30,00 € -15% 25,50 €
1 in magazzino
Barley twist cutter BTC2 | Titman Tools
  • -15%

Barley twist cutter

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
127,00 € -15% 107,95 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Barley twist cutter BTC6 | Titman Tools
  • -15%

Barley twist cutter

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
127,00 € -15% 107,95 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Cove mould cutter R10 S8mm with bearing | Titman Tools
  • -15%

Frese a raggio convesso

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
103,00 € -15% 87,55 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Cove mould cutter R8 S8mm with bearing | Titman Tools
  • -15%

Frese a raggio convesso

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
99,00 € -15% 84,15 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
cSpiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

cSpiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
22,00 € -15% 18,70 €
4 in magazzino
Double rounding cutter R2,5 S12mm with bearing | Titman Tools
  • -15%

Frese a mezzo tondo

Double rounding cutter R2,5 S12mm with bearing

Ref: SNCB10-12
Double rounding cutter with bearing
110,00 € -15% 93,50 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Dowel drill bit D10 L57 S10 mm Lefthand rot. | Titman Tools
  • -15%

Per legno

Dowel drill bit D10 L57 S10 mm Lefthand rot.

Ref: MB1057LH
Dowel drill bit   S10 mm Lefthand rot.
35,00 € -15% 29,75 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Dowel drill bit D5,5 L57 S10 mm Righthand rot. | Titman Tools
  • -15%

Per legno

Dowel drill bit D5,5 L57 S10 mm Righthand rot.

Ref: MB5.557RH
Dowel drill bit   S10 mm Righthand rot.
36,00 € -15% 30,60 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Guide and trim D6 S6 mm | Titman Tools
  • -15%

Frese a taglienti diritti per rifilare

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
55,00 € -15% 46,75 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Rounding over cutter D35 R12,7 S8 mm with guide pin | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over cutter D35 R12,7 S8 mm with guide pin

Ref: ROC127-8
Rounding over cutter with guide pin shank 8 mm
83,00 € -15% 70,55 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
25,00 € -15% 21,25 €
1 in magazzino
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
25,00 € -15% 21,25 €
1 in magazzino
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
25,00 € -15% 21,25 €
1 in magazzino
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
27,00 € -15% 22,95 €
2 in magazzino
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
27,00 € -15% 22,95 €
1 in magazzino
Straight bit 10mm L25 S8mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit 10mm L25 S8mm

Ref: M1025-8
Straight bit shank 8mm
48,00 € -15% 40,80 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Straight bit 20mm L25 S8mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit 20mm L25 S8mm

Ref: M2025-8
Straight bit shank 8mm
57,70 € -15% 49,05 €
2 in magazzino
Straight bit 5mm L20 S8mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit 5mm L20 S8mm

Ref: M520-8
Straight bit shank 8mm
38,00 € -15% 32,30 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Straight bit 6mm L23 S8mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit 6mm L23 S8mm

Ref: M623-8
Straight bit shank 8mm
38,00 € -15% 32,30 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Straight bit D40 L15 S12mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit D40 L15 S12mm

Ref: M4015-12
Straight bit shank 12 mm
105,00 € -15% 89,25 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna
Straight bit D5 L16 S6mm | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Straight bit D5 L16 S6mm

Ref: M516-6
Straight bit shank 6 mm
37,00 € -15% 31,45 €
Esaurito, si prega di chiedere informazioni sui tempi di consegna