Frese per legno

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Arbor for UG groovers (internal thread M12x1)For bearings with...

Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm

Arbor for UG groovers (internal thread M12x1)For bearings with...

Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm Arbors with shank 8 mm are only approved for groovers up to L6 mm.

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT arbor with ball bearing with shank 12 mm and hole 8mm

ENT arbor with ball bearing with shank 12 mm and hole 8mm

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8

D8  L20  S8mm

D8  L20  S8mm

D8  L20  S8mm

D8  L20  S8mm

D8  L20  S8mm

D8  L20  S8mm

Weather strip cutter Straight

Weather strip cutter Straight

Weather strip cutter Straight

Weather strip cutter Straight

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with...

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

For use in aluminum, sheet steel and plastic.

For use in aluminum, sheet steel and plastic.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

ENT arbor with ball bearing with shank 8 mm and hole 8mm

ENT arbor with ball bearing with shank 8 mm and hole 8mm

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

D8  L32  S8mm

D8  L32  S8mm