Frese per pantografi

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Straight bit shank 8mm

Straight bit shank 8mm

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Guttering cutter

Guttering cutter

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Miniature bevel cutter with bearing 45 degrees

Straight bit shank 8mm

Straight bit shank 8mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Guttering cutter

Guttering cutter

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 8mm

Straight bit shank 8mm

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials