Frese per pantografi

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line Raised panel chamfer bit 25°

Rounding over cutter R6,3 S=6mm

Rounding over cutter R6,3 S=6mm

Straight bit shank 8mm

Straight bit shank 8mm

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Bevel cutter for solid surface

Bevel cutter for solid surface

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Bevel cutter heavy duty

Bevel cutter heavy duty

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Bevel cutter with bearing

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Premium Half round cutter

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter R15 S=10mm

Rounding over cutter R15 S=10mm

Rounding over cutter R15 S=12mm

Rounding over cutter R15 S=12mm

Bevel cutter for repair work on solid surface material

Bevel cutter for repair work on solid surface material

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

ENT 17390 Tongue & Groove Set TC for wood thicknesses up...

ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank

Bevel cutter with bearing and high cutting length

Bevel cutter with bearing and high cutting length

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Half round profile cutter

Half round profile cutter

Barley twist cutter BTC2

Barley twist cutter BTC2

Barley twist cutter BTC4

Barley twist cutter BTC4