Single flute D7 L14 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ampio programma Frese professionali per un risultato perfetto.
Ci sono 55 prodotti.
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Straight bit shank 12 mm
Straight bit shank 12 mm
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Straight bit shank 12 mm
Straight bit shank 12 mm
Coving cutter with 90 degrees tangential outlet for solid surface
Coving cutter with 90 degrees tangential outlet for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm