Frese per pantografi

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with...

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with 8 mm shank.

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Straight cutter for Plastics Suitable for: Acrylonitrile...

Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

Straight bit shank 8mm

Straight bit shank 8mm