Filtra per

Disponibilità

Diametro del foro

Diametro attacco

Diametro (D)

Lunghezza taglierina - altezza

Lunghezza totale

Raggio/angolo

Frese

Frese per pantografi

Ampio programma Frese professionali per un risultato perfetto.

Filtri attivi

  • Lunghezza taglierina - altezza: 20mm
  • Lunghezza taglierina - altezza: 25mm
AB2 5,0x50 AB2 5,0x50

AB2 5,0x50

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Prezzo 10,00 €
AT2 5,0x50 AT2 5,0x50

AT2 5,0x50

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Prezzo 11,00 €
BT2 7,0x65 BT2 7,0x65

BT2 7,0x65

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Prezzo 15,00 €
STR2 6,0x60 R1 STR2 6,0x60 R1

STR2 6,0x60 R1

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 15,00 €
Spiral cutter Negative for Plastics D3 L25 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prezzo 15,30 € Prezzo base 17,00 €
  • -10%
  • -10%
BT4 6,0x65 BT4 6,0x65

BT4 6,0x65

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Prezzo 17,00 €
BT4 7,0x65 BT4 7,0x65

BT4 7,0x65

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Prezzo 18,00 €
Titman Straight cutter for Plastics D6 L20 S6mm

Titman Straight cutter for...

Straight cutter for plastic Suitable for plastics with a low...

Straight cutter for plastic Suitable for plastics with a low melting point. In-boring and clockwise rotation

Prezzo 18,00 € Prezzo base 20,00 €
  • -10%
  • -10%
BT4 8,0x65 BT4 8,0x65

BT4 8,0x65

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Prezzo 19,00 €
RS3 8,0x65 RS3 8,0x65

RS3 8,0x65

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 19,00 €
Straight Cutter HM Z2 D8 S8mm

Straight Cutter HM Z2 D8...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prezzo 19,50 €
Titman Straight cutter for Plastics D6 L25 S6mm

Titman Straight cutter for...

Straight cutter for plastic Suitable for plastics with a low...

Straight cutter for plastic Suitable for plastics with a low melting point. In-boring and clockwise rotation

Prezzo 19,80 € Prezzo base 22,00 €
  • -10%
  • -10%
STR2 8,0x70 R2 STR2 8,0x70 R2

STR2 8,0x70 R2

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 21,00 €
STR2 8,0x70 R0,3 STR2 8,0x70 R0,3

STR2 8,0x70 R0,3

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 21,00 €
RS4 8,0x65 RS4 8,0x65

RS4 8,0x65

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 22,00 €
ST3 7,0 x 65 ST3 7,0 x 65

ST3 7,0 x 65

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 22,00 €
Spiral cutter Positiv for Plastics D3 L25 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prezzo 22,50 € Prezzo base 25,00 €
  • -10%
  • -10%
Straight Cutter TC Z2 D16 S8mm

Straight Cutter TC Z2 D16...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prezzo 24,00 €
Straight Cutter TC Z2 D18 S8mm

Straight Cutter TC Z2 D18...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prezzo 24,80 €
ST4 6,0 x 65 ST4 6,0 x 65

ST4 6,0 x 65

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 25,00 €
ENT trimming cutter TC 12.7 x 25.4 x 68 mm

ENT trimming cutter TC 12.7...

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

Prezzo 25,00 €
EPROCUT EPROCUT Top bearing straight bit HW Z2 D16 L20 GL67 S8

EPROCUT EPROCUT Top bearing...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

Prezzo 25,20 € Prezzo base 28,00 €
  • -10%
  • -10%
ST4 7,0 x 65 ST4 7,0 x 65

ST4 7,0 x 65

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Prezzo 27,00 €
Straight Cutter TC Z2 D22 S8mm

Straight Cutter TC Z2 D22...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prezzo 27,00 €
Torna all'inizio