Frese per pantografi

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL Rounding over router bit R 4.8 mm with 8mm shank

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line Raised panel chamfer bit 25°

JVL Rounding over router bit R 6.35 mm with 8mm shank

JVL Rounding over router bit R 6.35 mm with 8mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8

Straight cutter for Plastics Suitable for: Acrylonitrile...

Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...

Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

Weather strip cutter bevel

Weather strip cutter bevel

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Guttering cutter

Guttering cutter

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.