Frese per pantografi

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL Rounding over router bit R 7.9 mm with 8mm shank

JVL Rounding over router bit R 7.9 mm with 8mm shank

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Straight cutter for plastic Suitable for plastics with a low...

Straight cutter for plastic Suitable for plastics with a low melting point. In-boring and clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

adatto per alluminio e plastica

adatto per alluminio e plastica

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm