Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Frese per pantografi
Ampio programma Frese professionali per un risultato perfetto.
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Straight Cutter TC Z1 D3...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Straight Cutter TC Z2 D16...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D18...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT trimming cutter TC 12.7...
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7...
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
Straight Cutter TC Z2 D22...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT trimming cutter TC 9.5...
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
Straight Cutter TC Z2 D24...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
copy of Straight bit D6 L16...
Straight bit shank 6 mm
Straight bit shank 6 mm
- -10%
- -10%
Straight bit 7mm L16 S8mm
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Straight bit D6 L16 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Straight bit D8 L20 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Finger joint cutter FJS
Finger joint cutter FJS
Finger joint cutter FJS
- -10%
- -10%
Half round profile cutter...
Half round profile cutter
Half round profile cutter
- -10%
- -10%
