EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Frese
Frese per rifilare a taglienti assiali
Ci sono 20 prodotti.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Taglierina guida per cuscinetti per rifilare impiallacciature...
Taglierina guida per cuscinetti per rifilare impiallacciature e bordi in plastica sporgenti. È anche possibile copiare utilizzando un modello. I diametri piccoli sono ideali per la lavorazione degli angoli interni.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Frese per rifilare a taglienti assiali