Titman Tools

manufacturer_7.jpg?time=1710769389
Titman Tools
 
Test indipendenti hanno dimostrato che le frese Titman sono le frese più resistenti al mondo. Le frese Titman non sono solo tra le migliori, ma anche tra le più sicure al mondo. Le frese Titman sono progettate pensando alla sicurezza e utilizzando materiali di altissima qualità, possiamo garantire rigorosi standard di qualità e sicurezza.
Prodotto nel Regno Unito.
Titman Tools. | JVL-Europe
Extensions M10x1.5 L40mm | Titman Tools
  • -15%

Adattatori

Extensions M10x1.5 L40mm

Ref: VER40-M10
Esaurito, si prega di chiedere informazioni sui tempi di consegna
20,00 € -15% 17,00 € 
Arbors for UG groovers M12x1. s12mm | Titman Tools
  • -15%

Frese a disco

Arbors for UG groovers M12x1. s12mm

Ref: UGA125/12
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm
Esaurito, si prega di chiedere informazioni sui tempi di consegna
21,00 € -15% 17,85 € 
Arbors for UG groovers for use with bearing only | Titman Tools
  • -15%

Frese a disco

Arbors for UG groovers for use with bearing only

Ref: UGA85/8
Arbor for UG groovers (internal thread M12x1)For bearings with bore 12 mm
Arbors with shank 8 mm are only approved for groovers up to L6 mm.
Esaurito, si prega di chiedere informazioni sui tempi di consegna
21,00 € -15% 17,85 € 
cSpiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

cSpiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 in magazzino
22,00 € -15% 18,70 € 
Titman Straight cutter for Plastics D6 L25 S6mm | Titman Tools
  • -15%

Frese a taglienti diritti per canali

Titman Straight cutter for Plastics D6 L25 S6mm

Ref: AS6L-6
Straight cutter for plastic
Suitable for plastics with a low melting point.
In-boring and clockwise rotation
4 in magazzino
22,00 € -15% 18,70 € 
EPROCUT Rounding over bit HW R2 S8 | Titman Tools
  • -15%

Frese a raggio concavo

EPROCUT Rounding over bit HW R2 S8

Ref: E-11215
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
1 in magazzino
24,00 € -15% 20,40 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
25,00 € -15% 21,25 € 
Spiral cutter Positiv for Plastics D3 L25 S3mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D3 L25 S3mm

Ref: AC325-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
25,00 € -15% 21,25 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 in magazzino
27,00 € -15% 22,95 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fresatura a spirale Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in magazzino
27,00 € -15% 22,95 €