Home

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Adatto a: Acciaio, Acciaio inossidabile, Ghisa,...

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, CO-superalloys, NI-superalloys, TI-superalloys

Adatto a: Acciaio, Acciaio inossidabile, Ghisa,...

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, CO-superalloys, NI-superalloys, TI-superalloys

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

Keyhole bit HW D=12,7 mm S=8

Keyhole bit HW D=12,7 mm S=8

Trimmers with bearing

Trimmers with bearing

Taglierina guida per cuscinetti per rifilare impiallacciature...

Taglierina guida per cuscinetti per rifilare impiallacciature e bordi in plastica sporgenti. È anche possibile copiare utilizzando un modello. I diametri piccoli sono ideali per la lavorazione degli angoli interni.

Trimmers with bearing

Trimmers with bearing

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Bearing guide trimmer double bearing for solid surface

Bearing guide trimmer double bearing for solid surface

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Profile cutter CC127

Profile cutter CC127