Filtra per
Disponibilità
Diametro del foro
Spessore
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
Circular saw blade for ripping and cross-cutting hard and soft...
Circular saw blade for ripping and cross-cutting hard and soft woods
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
ENT 17731 T-slot cutter TC 12.7 mm with 8 mm shank
Negative cutting angle. Suitable for cutting MDF, (double...
Negative cutting angle. Suitable for cutting MDF, (double faced) plastic laminated, hardboard and multilayer panels.
JVL STEAM circular saw blade 250 x 32 x 2 Z90
JVL STEAM circular saw blade 250 x 32 x 2 Z90
TCT Circular saw blade for DRY-CUTTER 250x2,2x 30 mm Z54
TCT Circular saw blade for DRY-CUTTER 250x2,2x 30 mm Z54
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Trimmers with bearing
Trimmers with bearing
Taglierina guida per cuscinetti per rifilare impiallacciature...
Taglierina guida per cuscinetti per rifilare impiallacciature e bordi in plastica sporgenti. È anche possibile copiare utilizzando un modello. I diametri piccoli sono ideali per la lavorazione degli angoli interni.
Trimmers with bearing
Trimmers with bearing
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
JVL STEAM circular saw blade 250 x 32 x 2 Z100
JVL STEAM circular saw blade 250 x 32 x 2 Z100
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
JVL STEAM circular saw blade 250 x 32 x 2 Z128 - High speed...
JVL STEAM circular saw blade 250 x 32 x 2 Z128 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines.
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
JVL STEAM Circular saw blade 250 x 32 x 2 Z200 T4 - High...
JVL STEAM Circular saw blade 250 x 32 x 2 Z200 T4 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines.
HSS DM05 TiALN SAW BLADE 275 x 1.6 x 32 Z=200 T=4
HSS DM05 TiALN SAW BLADE 275 x 1.6 x 32 Z=200 T=4
