Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Straight bit shank 6 mm
Straight bit shank 6 mm
Bottom cutting. suitable for plunge. With 8 mm shank
Bottom cutting. suitable for plunge. With 8 mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Righthand rot.
Dowel drill bit S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
Cove mould cutter with bearing
Cove mould cutter with bearing
