Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Straight bit shank 6 mm
Straight bit shank 6 mm
Bottom cutting. suitable for plunge. With 8 mm shank
Bottom cutting. suitable for plunge. With 8 mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Righthand rot.
Dowel drill bit S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
