Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Hinge boring bit with centre point and two bevelled flutes....
Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.
Straight bit shank 8mm
Straight bit shank 8mm
Specifically designed for cutting in hinges. stair treads and...
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Titman flute bit R=3 S=8
Titman flute bit R=3 S=8
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to...
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
V-Groove cutter for solid surface
V-Groove cutter for solid surface
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
