Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...
EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Straight bit shank 6 mm
Straight bit shank 6 mm
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Bottom cutting. suitable for plunge. With 8 mm shank
Bottom cutting. suitable for plunge. With 8 mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Righthand rot.
Dowel drill bit S10 mm Righthand rot.
