Home

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...

Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Adatto a: Acciaio, Acciaio inossidabile, Ghisa,...

Adatto a: Acciaio, Acciaio inossidabile, Ghisa, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Bore 30mm. Cutterhead with HW reversible knives and spurs on...

Bore 30mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Bore 50mm.  Cutterhead with HW reversible knives and spurs on...

Bore 50mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Bore 40mm.  Cutterhead with HW reversible knives and spurs on...

Bore 40mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

Stark along grain joint cutter 125X50 Z=2 YH152AAM

High tensile steel tool body fitted with four HSS planing...

High tensile steel tool body fitted with four HSS planing knives. Positioning of the 30x3 mm regrindableknives with appropriate gauge. MEC

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

Stark cross grain joint cutter 125X60 Z=3 YH156AAM

For edge processing of wood and wood-containing products such...

For edge processing of wood and wood-containing products such as MDF, chipboard MAN

High tensile steel tool body fitted with four HSS planing...

High tensile steel tool body fitted with four HSS planing knives. Positioning of the 30x3 mm regrindableknives with appropriate gauge. MEC