BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filtra per
Disponibilità
Diametro del foro
Spessore
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 33 prodotti.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Rebate cutter with bearing
Rebate cutter with bearing
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615