BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 31 prodotti.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
JVL Chamfer bit 38.1 mm 45° with 8mm shank
JVL Chamfer bit 38.1 mm 45° with 8mm shank
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Rebate cutter with bearing
Rebate cutter with bearing
Bevel cutter heavy duty
Bevel cutter heavy duty
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Rebate cutter with bearing
Rebate cutter with bearing
Bevel cutter with high cutting length
Bevel cutter with high cutting length
Cove mould cutter with bearing
Cove mould cutter with bearing
rounding over both sides at once.Suitable for material...
rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.
Adjustable Double chamfering bit with bearing 16 to 32 mm....
Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
V-Groove cutter. These cutters create a straight line of...
V-Groove cutter. These cutters create a straight line of approx. 1 mm at the bottom.
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28...
Titman Staff / corner bead bit with bearing HW Z=2 D=38 L=28 R=9,5 S=8
Shallow finger pull cutter
Shallow finger pull cutter
Profile mould cutter
Profile mould cutter