Rounding over cutter R6.3...
Rounding over cutter R6,3 S=6mm
Rounding over cutter R6,3 S=6mm
- -10%
- -10%
Filtra per
Disponibilità
Diametro del foro
Spessore
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 35 prodotti.
Rounding over cutter R6,3 S=6mm
Rounding over cutter R6,3 S=6mm
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter for solid surface
Bevel cutter for solid surface
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Rounding over cutter R6.3 S8mm
Rounding over cutter R6.3 S8mm
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Bevel cutter for repair work on solid surface material
Bevel cutter for repair work on solid surface material
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Half round profile cutter
Half round profile cutter
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Tenoning cutter for repair work on solid surface material
Tenoning cutter for repair work on solid surface material
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm