Home

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto a: Acciaio, Acciaio inossidabile e rame

Adatto per: alluminio, rame, plastica

Adatto per: alluminio, rame, plastica

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Two flute solid carbide spiral bit 5 mm with 8 mm shank....

Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Guttering cutter

Guttering cutter

Rounding over cutter R10 S=10mm

Rounding over cutter R10 S=10mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter R4  S8mm

Rounding over cutter R4  S8mm

Rounding over cutter R4 S=6mm

Rounding over cutter R4 S=6mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Profile cutter TRC19

Profile cutter TRC19

Profile cutter OG

Profile cutter OG

Rounding over cutter R8  S8mm

Rounding over cutter R8  S8mm

Rounding over cutter R10  S8mm

Rounding over cutter R10  S8mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8...

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8 mm shank.  For woodthickness from 19 to 21 mm