Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z1
Spiral finishing cutter upcut Z1
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Spiral finishing cutter downcut Z1
Spiral finishing cutter downcut Z1
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Spiral finishing cutter downcut Z3
Spiral finishing cutter downcut Z3
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
Titman flute bit R=4 S=8
Titman flute bit R=4 S=8
Spiral finishing cutter downcut Z3
Spiral finishing cutter downcut Z3
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Premium Half round cutter
Premium Half round cutter
