Home

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Bevel cutter with bearing

Bevel cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...

Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465

Straight bit shank 12 mm

Straight bit shank 12 mm

Trimmers with bearing top and bottom

Trimmers with bearing top and bottom

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M12x1

Replacement tip Straight bit Z=1 Shank M12x1

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Replacement tip Straight bit Z=1 Shank 12 mm

Bore 30mm. Cutterhead with HW reversible knives and spurs on...

Bore 30mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M12x1

Replacement tip Straight bit Z=1 Shank M12x1

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M10x1.5

Replacement tip Straight bit Z=1 Shank M12x1

Replacement tip Straight bit Z=1 Shank M12x1