Single flute D8 L14 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Filtra per
Disponibilità
Diametro del foro
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Ci sono 113 prodotti.
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio,...
Adatto per: Acciaio, Acciaio inossidabile, Ghisa, alluminio, rame e plastica
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Water slot cutter for plastic and aluminium
Water slot cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Adatto a: Acciaio, Acciaio inossidabile, Ghisa, Alluminio e rame
Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...
Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Two flute solid carbide spiral bit 8 mm with 8 mm shank....
Two flute solid carbide spiral bit 8 mm with 8 mm shank. Positive (upcut) spiral.
Spiral finishing cutter upcut Z3
Spiral finishing cutter upcut Z3
Straight bit shank 12 mm
Straight bit shank 12 mm