Filtra per
Disponibilità
Diametro attacco
Diametro (D)
Lunghezza taglierina - altezza
Lunghezza totale
Raggio/angolo
Frese
Home
Straight Cutter TC Z1 D3...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
RR 10,0x72
Adatto a: Acciaio, Acciaio inossidabile e rame
Adatto a: Acciaio, Acciaio inossidabile e rame
AS2 10,0x72
Adatto per: alluminio, rame, plastica
Adatto per: alluminio, rame, plastica
Straight Cutter TC Z2 D16...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D18...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight Cutter TC Z2 D22...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
EPROCUT Top bearing...
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8
- -10%
- -10%
Straight Cutter TC Z2 D24...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
copy of Straight bit D6 L16...
Straight bit shank 6 mm
Straight bit shank 6 mm
- -10%
- -10%
Straight bit 7mm L16 S8mm
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Straight bit D15 L30 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Weather strip cutter...
Weather strip cutter Straight double
Weather strip cutter Straight double
- -10%
- -10%
Side slotting cutter Z2...
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
- -10%
- -10%
Finger joint cutter FJS
Finger joint cutter FJS
Finger joint cutter FJS
- -10%
- -10%
Double trimmer D18 S8 mm
for simultaneous machining of top and bottom edges. For...
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
- -10%
- -10%
Tenoning cutter D18 S12mm...
Tenoning cutter for repair work on solid surface material
Tenoning cutter for repair work on solid surface material
- -10%
- -10%
Bevel cutter 45° S12mm
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%
Reverse profil bevel cutter...
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%