Best sellers

Profile guide cutter D25 S8mm | Titman Tools
  • -15%

Pattern bit / Top bearing straight bits

Profile guide cutter D25 S8mm

Ref: PGC25-8
Profile guide cutter with bearing on shank
€104.28 -15% €88.64
2 in stock
V-Groove cutter 22.5° S8mm | Titman Tools
  • -15%

V-Groove Bits

V-Groove cutter 22.5° S8mm

Ref: VGC225-8
These cutters create a straight line of approx. 1 mm at the bottom.
D=25 A°=22.5° L1=5,2 L2=12 B=13,5 S=8mm 
€53.80 -15% €45.73
1 in stock
Tongue and groove cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Tongue and groove cutter for solid surface

Ref: XC511-12
In combination with the XC506-12 cutter you can make a tongue and groove connection.
Suitable for e.g.

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
€142.48 -15% €121.11
1 in stock
Tongue and groove cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Tongue and groove cutter for solid surface

Ref: XC506-12
In combination with the XC511-12 cutter you can make a tongue and groove connection.
Suitable for e.g.

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
€142.48 -15% €121.11
1 in stock
Hob cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Hob cutter for solid surface

Ref: XC341-12
Hob cutter for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
€194.18 -15% €165.05
1 in stock
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines.
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085

Ref: S13165
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines.
RT02 pre milling unit
€660.00 -20% €528.00
Out of stock, please inquire about delivery time
EDGE SCRAPER 12.7 x 12.7 x 3.18 R2 | Wirutex
  • -20%

Knives for Biesse Machines

EDGE SCRAPER 12.7 x 12.7 x 3.18 R2

Ref: D01535
EDGE SCRAPER 12,7 x 12,7 x 3,18 R=2  1 piece N3402N0054
RBK-503 edge scraper unit
€49.50 -20% €39.60
14 in stock
Single flute cutter D8 S12 for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Single flute cutter D8 S12 for solid surface

Ref: XC001-8-12
Groove cutter Z1 with diameter 8mm and shank 12mm.
Suitable for Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari
€38.20 -15% €32.47
1 in stock
Titman flute bit R4 S8mm | Titman Tools
  • -15%

Flute & bead bit

Titman flute bit R4 S8mm

Ref: DSB9-8
Titman flute bit R=4 and shank 8mm
€110.68 -15% €94.08
1 in stock
Titman mini rounding over cutter R3 S8 | Titman Tools
  • -15%

Rounding over bits

Titman mini rounding over cutter R3 S8

Ref: ROCB3/635-8
Miniature milling cutter with bearing for rounding off wood. wood-based materials and Laminates. Due to the very small bearing. the milling cutter is particularly suitable for for model making.
€93.91 -15% €79.82
2 in stock
Dovetail router bit 22x20 15° S8mm | Titman Tools
  • -15%

Dovetail bits

Dovetail router bit 22x20 15° S8mm

Ref: DC22-8
Dovetail router bit 22x20 15°  S8mm
€63.00 -15% €53.55
Out of stock, please inquire about delivery time
JVL STEAM circular saw blade 275 x 32 x 2 Z200 | JVL Tools

for metal

JVL STEAM circular saw blade 275 x 32 x 2 Z200

Ref: St275-32-2-200
JVL STEAM Circular saw blade
- High speed tungsten Molybdenum steel HSS DMo5 M2
- Steam threated. entry level blade
- Suitable for manual and semi automatic cut off machines.
€66.98
7 in stock
Knive for YH152 | Stark
  • -21%

Stark profile knives

Knive for YH152

Ref: 605002
Knive for YH152
€38.38 -21% €30.32
6 in stock
Knive 601438 A6 | Stark
  • -21%

Stark profile knives

Knive 601438 A6

Ref: 601438-A6
Stark knife 601438 profile A6 for e.g. YS113AZM
€28.10 -21% €22.20
2 in stock
Stark profile knive D2 | Stark
  • -21%

Stark profile knives

Stark profile knive D2

Ref: 601446
Stark profile knive D2 for Stark Tooling set for profiles and counterprofilesOnly knive D2
1 piece
€31.00 -21% €24.49
1 in stock
Stark profile knive D1 | Stark
  • -21%

Stark profile knives

Stark profile knive D1

Ref: 601445
Stark profile knife D1 for Stark Tooling set for profiles and counterprofilesOnly knife D1
1 piece
€31.00 -21% €24.49
7 in stock
Knife R12 | Stark
  • -21%

Stark profile knives

Knife R12

Ref: 601457
Knife R12
€44.10 -21% €34.84
Out of stock, please inquire about delivery time
Stark Kitchen cabinet set Bore 30mm | Stark
  • -21%

Profile-counterprofile cutterhead

Stark Kitchen cabinet set Bore 30mm

Ref: YS101AZM030
The set consists of two cutterheads with aluminium bodies.
For wood thickness 22-24mm

MAN

1. The cutterhead for profile and counterprofile cutting is supplied with HW knives so to obtain profile A (602075) but can also use HW knives to obtain profile B. C and D wich are not included in this set.
2. The raising panel cutterhead fits four HW knives positioned with shear angle and permits to obtain the three profiles. 
€380.00 -21% €300.20
2 in stock
Tooling set for rounding and chamfering Bore 30mm YS118AZM-030 | Stark
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 30mm YS118AZM-030

Ref: YS118AZM030
YS118 Bore 30mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
€439.50 -21% €347.21
1 in stock
Stark Groove cutter for Lamello mini spot 100x22 | Stark
  • -21%

Grooving cutterheads

Stark Groove cutter for Lamello mini spot 100x22

Ref: IN03TM02022
Stark Groove cutter for Lamello mini spot 100x22
TCT-cutter with steel body and 4 pin holes for standard handheld machines. Chip thickness limitationand reduced recoil. suitable for manual feed.
€101.20 -21% €79.95
5 in stock
JVL STEAM circular saw blade 315 x 32 x 2 Z200 | JVL Tools

for metal

JVL STEAM circular saw blade 315 x 32 x 2 Z200

Ref: Steam-315-32-2-200
JVL STEAM circular saw blade 315mm x 32 x 2 Z200
- High speed tungsten Molybdenum steel HSS DMo5 M2
- Steam threated. entry level blade
- Suitable for manual and semi automatic cut off machines.
- Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
€113.00
1 in stock
Mandrex hole saw UltraXcut 127mm | Mandrex
  • -25%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 127mm

Ref: MHTQ01027B
MXqs All Purpose UltraXcut 127mm

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
€70.97 -25% €53.23
Out of stock, please inquire about delivery time
Mandrex hole saw UltraXcut 105mm | Mandrex
  • -25%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 105mm

Ref: MHTQ0105B
MXqs All Purpose UltraXcut 105mm

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
€48.36 -25% €36.27
Out of stock, please inquire about delivery time
Mandrex DIAMOND Holesaw ConcreteXdry 72mm with adapter | Mandrex
  • -25%

Mandrex "ONE Click"

Mandrex DIAMOND Holesaw ConcreteXdry 72mm with adapter

Ref: MDDB1Q072B
The Mandrex ConcreteXdry holesaws are robust and suitable for use in the toughest conditions. The laser welded segments are specially designed to ensure an extremely long life.
Fast and clean drilling is guaranteed by using the MXqs ONE Click hole saw system.
€76.23 -25% €57.17
1 in stock