Best sellers

Active filters

  • Radius / Angle:45° clear
Double rounding over / chamfer bit adjustable R2.5 45° S8mm | Titman Tools
  • -20%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
Out of stock, please inquire about delivery time
€158.00 -20% €126.40 
CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm | Stark
  • -10%

Cutterhead for Bevels

CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm YH131AAM

Ref: YH131AAM040
Body in light alloy execution. standard tungsten carbide reversible knives. precise 45 degrees bevel cuts on solid
wood and all types of board material. chip thickness limitation and reduced recoil. suitable for manual feed.
2 in stock
€180.00 -10% €162.00 
Bevel cutter with guide pin 45° S8mm | Titman Tools
  • -20%

Chamfering bits

Bevel cutter with guide pin 45° S8mm

Ref: CHCP45-8
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Out of stock, please inquire about delivery time
€76.00 -20% €60.80 
Engraving cutter 45° S12 | Titman Tools
  • -20%

V-Groove Bits

Engraving cutter 45° S12

Ref: VGC45SF-12
Titman Engraving cutter 45°  Shank 12mm

D=44 A=45° L=25 B=35 GL=64 S=12
1 in stock
€140.00 -20% €112.00 
V-Groove cutter for solid surface | Titman Tools
  • -20%

For corian / HIMACS

V-Groove cutter for solid surface

Ref: XC601-12
V-Groove cutter for solid surface
Out of stock, please inquire about delivery time
€104.00 -20% €83.20 
Cutterhead for 45 degrees bevels 150mm Bore 30mm YH131AAM-030 | Stark
  • -10%

Cutterhead for Bevels

Cutterhead for 45 degrees bevels 150mm Bore 30mm YH131AAM

Ref: YH131AAM030
Body in light alloy execution. standard tungsten carbide reversible knives. precise 45 degrees bevel cuts on solid
wood and all types of board material. chip thickness limitation and reduced recoil. suitable for manual feed.
1 in stock
€171.00 -10% €153.90