Prices drop

Active filters

  • Cutting length/height::12 mm clear
  • Cutting length/height::25mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutters:2 clear
Rounding over cutter with extended cutting edge R4 S8mm | Titman Tools
  • -15%

Rounding over bits

Rounding over cutter with extended cutting edge R4 S8mm

Ref: SROCB4/127-8
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Out of stock, please inquire about delivery time
€71.32 -15% €60.62 
Sinking cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
1 in stock
€69.96 -15% €59.47 
Spiral cutter D6 L20 S6mm Z2 Positive - Upcut | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter D6 L20 S6mm Z2 Positive - Upcut

Ref: PK625-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
1 in stock
€57.00 -15% €48.45 
Spiral cutter D8 L25 S8mm Z2 Positive - Upcut | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter D8 L25 S8mm Z2 Positive - Upcut

Ref: PK825-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
1 in stock
€73.00 -15% €62.05 
Spiral cutter for aluminium Z2 D3 L12 S3mm | Titman Tools
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D3 L12 S3mm

Ref: AL312-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Out of stock, please inquire about delivery time
€40.00 -15% €34.00 
Spiral cutter for aluminium Z2 D6 L25 S6mm | Titman Tools
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D6 L25 S6mm

Ref: AL625-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Out of stock, please inquire about delivery time
€66.00 -15% €56.10 
Spiral cutter for aluminium Z2 D8 L25 S8mm | Titman Tools
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D8 L25 S8mm

Ref: AL825-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
1 in stock
€84.00 -15% €71.40 
Spiral cutter Negative for Plastics D10 L25 S10mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D10 L25 S10mm

Ref: AC10DC-10
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€50.00 -15% €42.50 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D3 L25 S3mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D3 L25 S3mm

Ref: AC325DC-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€17.00 -15% €14.45 
Spiral cutter Negative for Plastics D8 L25 S8mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D8 L25 S8mm

Ref: AC8DC-8
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€35.00 -15% €29.75 
Spiral cutter Positiv for Plastics D10 L25 S10mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D10 L25 S10mm

Ref: AC10-10
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 in stock
€40.00 -15% €34.00 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€12.00 -15% €10.20 
Spiral cutter Positiv for Plastics D3 L25 S3mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L25 S3mm

Ref: AC325-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€25.00 -15% €21.25 
Spiral cutter Positiv for Plastics D8 L25 S8mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D8 L25 S8mm

Ref: AC8-8
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 in stock
€36.00 -15% €30.60 
Spiral cutter Z2 Positive - Upcut 3mm S3mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut 3mm S3mm

Ref: PK312-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
2 in stock
€34.50 -15% €29.33 
Titman dovetail router bit 15° D26 S12mm | Titman Tools
  • -15%

Dovetail bits

Titman dovetail router bit 15° D26 S12mm

Ref: DC26-12
Titman professional dovetail router bit 15 degrees with Shank 12mm and Diameter 26mm
Out of stock, please inquire about delivery time
€98.48 -15% €83.71 
Trimmer D18 S12mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 S12mm negative axis angle

Ref: BGT90LKS-12
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€51.00 -15% €43.35 
Trimmer D18 S8mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 S8mm negative axis angle

Ref: BGT90S-8
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€49.00 -15% €41.65 
Trimmer D18 S6mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 S6mm negative axis angle

Ref: BGT90S-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€49.00 -15% €41.65 
Trimmer D18 L25 S6mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 L25 S6mm negative axis angle

Ref: BGT90LKS-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€51.00 -15% €43.35 
Trimmer D18 L25 S8mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 L25 S8mm negative axis angle

Ref: BGT90LKS-8
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€51.00 -15% €43.35 
Trimmers with bearing D12,7 L25,4 S12mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D12,7 L25,4 S12mm

Ref: IBGT90LK-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€53.00 -15% €45.05 
Trimmers with bearing D12,7 L25,4 S6mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D12,7 L25,4 S6mm

Ref: IBGT90LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€53.00 -15% €45.05 
Trimmers with bearing D12,7 L25,4 S8mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D12,7 L25,4 S8mm

Ref: IBGT90LK-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€53.00 -15% €45.05