Prices drop

Active filters

  • Cutting length/height::32mm clear
  • Cutting length/height::33mm clear
  • Cutting length/height::60mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(18mm) L2(33mm) clear
  • Cutting length/height::L2(16mm) L4(10mm) clear
  • Cutting length/height::L2(16mm) L4(10mm) clear
  • Cutting length/height::L2(16mm) L4(10mm) clear
  • Cutting length/height::L2(16mm) L4(10mm) clear
  • Cutting length/height::L2(16mm) L4(10mm) clear
Cross grain joint cutter 125X60 Z3 Bore 30mm | Stark
  • -5%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 30mm

Ref: YH156AAM030
Light alloy body. standard tungsten carbide profiled knives for high precision jointing of hardwood and softwood. chip thickness limitation and reduced recoil. suitable for manual feed. YH152AAM: along the grain joints. YH156AAM: across the grain joints.
Out of stock, please inquire about delivery time
€228.70 -5% €217.27 
Cross grain joint cutter 125X60 Z3 Bore 35mm | Stark
  • -5%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 35mm

Ref: YH156AAM035
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -5% €236.84 
Cross grain joint cutter 125X60 Z3 Bore 40mm | Stark
  • -5%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 40mm

Ref: YH156AAM040
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -5% €236.84 
Cross grain joint cutter 125X60 Z3 Bore 50mm | Stark
  • -5%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 50mm

Ref: YH156AAM050
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -5% €236.84 
Finger joint cutter GJ1 | Titman Tools
  • -15%

Glue joint cutter

Finger joint cutter GJ1

Ref: GJ1-12
Finger joint cutter GJ1
Out of stock, please inquire about delivery time
€198.00 -15% €168.30 
Half round cutter R10 S12mm | Titman Tools
  • -15%

Staff / corner bead bit

Half round cutter R10 S12mm

Ref: SBC10-12
Premium Half round cutter
Out of stock, please inquire about delivery time
€114.00 -15% €96.90 
Mandrex hole saw UltraXcut 105mm | Mandrex
  • -15%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 105mm

Ref: MHTQ0105B
MXqs All Purpose UltraXcut 105mm

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
Out of stock, please inquire about delivery time
€48.36 -15% €41.11 
Mandrex hole saw UltraXcut 127mm | Mandrex
  • -15%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 127mm

Ref: MHTQ01027B
MXqs All Purpose UltraXcut 127mm

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
Out of stock, please inquire about delivery time
€70.97 -15% €60.32 
Mandrex hole saw UltraXcut 68mm | Mandrex
  • -15%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 68mm

Ref: MHTQ0068B
MXqs All Purpose UltraXcut

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
1 in stock
€33.00 -15% €28.05 
Mandrex hole saw UltraXcut 68mm | Mandrex
  • -15%

Mandrex "ONE Click"

Mandrex hole saw UltraXcut 76mm

Ref: MHTQ0076B
MXqs All Purpose UltraXcut

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills
1 in stock
€35.84 -15% €30.46 
Nesting ECO Z3+1 12x16 S12mm | Wirutex
  • -20%

Nesting

Nesting ECO Z3+1 12x16 S12mm

Ref: S13494

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
Out of stock, please inquire about delivery time
€296.00 -20% €236.80 
Nesting ECO Z3+1 12x21 S12mm | Wirutex
  • -20%

Nesting

Nesting ECO Z3+1 12x21 S12mm

Ref: S13492

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
Out of stock, please inquire about delivery time
€394.00 -20% €315.20 
Nesting ECO Z3+1 12x26 S12mm | Wirutex
  • -20%

Nesting

Nesting ECO Z3+1 12x26 S12mm

Ref: S13490

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
Out of stock, please inquire about delivery time
€492.00 -20% €393.60 
Nesting ECO Z3+1 14x30 S12mm | Wirutex
  • -20%

Nesting

Nesting ECO Z3+1 14x30 S12mm

Ref: S13456

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
Out of stock, please inquire about delivery time
€676.00 -20% €540.80 
Nesting ECO Z3+1 16x35 S16mm | Wirutex
  • -20%

Nesting

Nesting ECO Z3+1 16x35 S16mm

Ref: S13988

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
Out of stock, please inquire about delivery time
€955.00 -20% €764.00 
Sinking cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
1 in stock
€69.96 -15% €59.47