Prices drop

Active filters

  • Cutting length/height::24,8mm clear
  • Cutting length/height::44mm clear
  • Cutting length/height::L1(6mm) L2(14mm) clear
  • Cutting length/height::L1(10mm) L2(15mm) clear
  • Cutting length/height::L1(15mm) L2(7mm) clear
  • Cutting length/height::L1(35mm) clear
  • Cutting length/height::L1(35mm) clear
  • Cutting length/height::L1(35mm) clear
  • Cutting length/height::L1(35mm) clear
  • Cutting length/height::L1(35mm) clear
Bevel cutter with center tip 45° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 45° S8mm

Ref: BCF45-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€83.00 -15% €70.55 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm | Stark
  • -5%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
1 in stock
€210.00 -5% €199.50 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm | Stark
  • -5%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -5% €266.00 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm | Stark
  • -5%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -5% €266.00 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm | Stark
  • -5%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -5% €266.00 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm | Stark
  • -5%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -5% €266.00 
Eco-Line Mini D16 L44 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L44 S16mm PCD router cutter

Ref: P03850
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D18 L44 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L44 S20mm PCD router cutter

Ref: P03910
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D20 L44 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L44 S20mm PCD router cutter

Ref: P03970
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Guttering cutter R12,7 S12mm | Titman Tools
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
Slat wall cutter with Radius | Titman Tools
  • -15%

T-Slot cutter

Slat wall cutter with Radius

Ref: TSSR31-12
Slat wall cutter with Radius
Out of stock, please inquire about delivery time
€175.13 -15% €148.86 
T-Slot cutter D15 L6 S8 mm | Titman Tools
  • -15%

T-Slot cutter

T-Slot cutter D15 L6 S8 mm

Ref: TSS15-8
T-Slot cutter
Out of stock, please inquire about delivery time
€73.03 -15% €62.08