Prices drop

Active filters

  • Cutting length/height::6,2mm clear
  • Cutting length/height::38mm clear
  • Cutting length/height::L1(3mm) L2(5mm) clear
  • Cutting length/height::L1(14mm) clear
  • Cutting length/height::L1(15mm) L2(7mm) clear
  • Cutting length/height::L1(18) L2(35) clear
Slat wall cutter with Radius | Titman Tools
  • -15%

T-Slot cutter

Slat wall cutter with Radius

Ref: TSSR31-12
Slat wall cutter with Radius
Out of stock, please inquire about delivery time
€175.13 -15% €148.86 
Trimmer D12.7 L38 S12mm with double bearing | Titman Tools
  • -15%

Flush trim bit

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmer D12.7 L38 S8mm with double bearing | Titman Tools
  • -15%

Flush trim bit

Trimmer D12.7 L38 S8mm with double bearing

Ref: BGT903LK-8
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
V-Groove cutter 30° S12mm | Titman Tools
  • -15%

V-Groove Bits

V-Groove cutter 30° S12mm

Ref: VGC30-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=21,5 A=30° L1=6,2 L2=12 B=12 S=12mm
Out of stock, please inquire about delivery time
€55.84 -15% €47.46 
V-Groove cutter 30° S8mm | Titman Tools
  • -15%

V-Groove Bits

V-Groove cutter 30° S8mm

Ref: VGC30-8
These cutters create a straight line of approx. 1 mm at the bottom.
D=21,5 A=30° L1=6,2 L2=12 B=12 S=8mm 
1 in stock
€55.84 -15% €47.46 
V-Groove cutter 30° S6mm | Titman Tools
  • -15%

V-Groove Bits

V-Groove cutter 30° S6mm

Ref: VGC30-6
These cutters create a straight line of approx. 1 mm at the bottom.
D=21,5 A=30° L1=6,2 L2=12 B=12 S=6mm 
1 in stock
€55.84 -15% €47.46 
Weather strip D36 S12mm cutter with bearing | Titman Tools
  • -15%

Weatherseal bits

Weather strip D36 S12mm cutter with bearing

Ref: USD36-12
Cutter combination for milling grooves for flashover seals.
Suitable for seals from:
 

Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
1 in stock
€134.54 -15% €114.36