Prices drop

Active filters

  • Cutting length/height::8 - 28mm clear
  • Cutting length/height::11-22mm clear
  • Cutting length/height::37mm clear
  • Cutting length/height::L1(4,5mm) L2(12mm) clear
  • Cutting length/height::L1(18mm) L2(33mm) clear
Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm | Stark
  • -5%

Grooving cutterheads

Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm

Ref: TH09TM20030
Bore 30mm
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
Out of stock, please inquire about delivery time
€402.60 -5% €382.47 
Double rounding over / chamfer bit adjustable R2.5 45° S8mm | Titman Tools
  • -15%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
Out of stock, please inquire about delivery time
€129.74 -15% €110.28 
Radius engraving cutter D13 R4 S8mm | Titman Tools
  • -15%

V-Groove Bits

Radius engraving cutter D13 R4 S8mm

Ref: EC4-8
Radius engraving cutter
These double-edged cutters create a flat of approx. 1 mm at the bottom.
1 in stock
€68.00 -15% €57.80 
Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm | Stark
  • -5%

Grooving cutterheads

Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm

Ref: TH09TM20040
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
Out of stock, please inquire about delivery time
€443.80 -5% €421.61 
Trimmers with bearing D12,7 L37 S12mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D12,7 L37 S12mm

Ref: IBGT90LK1-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€95.00 -15% €80.75 
Trimmers with bearing D18 L37 S12mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D18 L37 S12mm

Ref: BGT90LK1-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€84.00 -15% €71.40