Prices drop

Active filters

  • Cutting length/height::8 - 28mm clear
  • Cutting length/height::38mm clear
  • Cutting length/height::85mm clear
  • Cutting length/height::L1(3mm) L2(5mm) clear
  • Cutting length/height::L1(3mm) L2(12mm) clear
  • Cutting length/height::L1(18mm) L2(33mm) clear
Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm | Stark
  • -5%

Grooving cutterheads

Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm

Ref: TH09TM20030
Bore 30mm
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
Out of stock, please inquire about delivery time
€402.60 -5% €382.47 
Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm | Stark
  • -5%

Grooving cutterheads

Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm

Ref: TH09TM20040
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
Out of stock, please inquire about delivery time
€443.80 -5% €421.61 
Trimmer D12.7 L38 S12mm with double bearing | Titman Tools
  • -15%

Flush trim bit

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmer D12.7 L38 S8mm with double bearing | Titman Tools
  • -15%

Flush trim bit

Trimmer D12.7 L38 S8mm with double bearing

Ref: BGT903LK-8
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Weather strip D36 S12mm cutter with bearing | Titman Tools
  • -15%

Weatherseal bits

Weather strip D36 S12mm cutter with bearing

Ref: USD36-12
Cutter combination for milling grooves for flashover seals.
Suitable for seals from:
 

Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
1 in stock
€134.54 -15% €114.36