Prices drop

Active filters

  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::L1(3mm) L2(5mm) clear
  • Cutting length/height::L1(25mm) L2(29mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Tooling set for rounding and chamfering Bore 30mm YS118AZM-030 | Stark
  • -5%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 30mm YS118AZM-030

Ref: YS118AZM030
YS118 Bore 30mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
1 in stock
€439.50 -5% €417.53 
Tooling set for rounding and chamfering Bore 40mm | Stark
  • -5%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 40mm

Ref: YS118AZM040
Bore 40mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
1 in stock
€469.50 -5% €446.03 
Weather strip D36 S12mm cutter with bearing | Titman Tools
  • -15%

Weatherseal bits

Weather strip D36 S12mm cutter with bearing

Ref: USD36-12
Cutter combination for milling grooves for flashover seals.
Suitable for seals from:
 

Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
1 in stock
€134.54 -15% €114.36